Das Filter Blog
Rolling Paper Sizes Chart (mm): Single Wide, 1 1/4, King Slim, King
Quick answer: Single wide papers are about 70 x 37mm, 1 1/4 papers about 78 x 44mm, king size slim about 110 x 44mm, and king size about 110 x 53 to 60mm. Exact sizes vary by a few millimeters from brand to brand. For tips, use 6mm with single wide, 7mm or 8mm with 1 1/4 and king size slim, and 8mm or 12mm with king size.
Rolling paper size chart (mm)
| Paper size | Length | Width | Das tip that fits |
|---|---|---|---|
| Single wide | 69–70mm | 36–38mm | Slim Jim, 6mm |
| 1 1/4 | 77–78mm | 44mm | Midway, 7mm or Big Boy, 8mm |
| King size slim | 108–110mm | 42–46mm (most specs list 44mm) | Midway (7mm) or Big Boy (8mm) |
| King size (regular) | 108–110mm | 53–60mm | Big Boy (8mm) or 12mm |
In inches, that's roughly 2.75 x 1.4 for single wide, 3.1 x 1.7 for 1 1/4, 4.3 x 1.7 for king size slim and 4.3 x 2.1 to 2.4 for king size.
Length is the long edge. Width is the short edge, from the gum strip to the opposite side, and it decides how thick a roll the paper can wrap. Zig-Zag also lists 1 1/2 papers at about 78 x 60mm: 1 1/4 length, but wider.
Sources: Zig-Zag's rolling paper size chart and paper maker Roll4You's specification sheet (69 x 37, 77 x 44, 108 x 44 and 108 x 53mm). RAW Classic King Size Slim is sold as 110 x 44mm. If your booklet lists its size, go by that.
1 1/4 vs king size: which should you buy?
King size is about 30mm longer than 1 1/4. That's the main difference. The width depends on which king size you pick:
- King size slim has about the same width as 1 1/4 (around 44mm), so the roll is the same thickness, just longer.
- Regular king size is wider too (about 53 to 60mm), so it rolls a longer, fatter roll.
Pick 1 1/4 for an everyday single roll. Zig-Zag calls it the most popular size. Pick king size slim if you want more length without a thicker roll, and regular king size for big rolls, sharing, or a 12mm tip. Your rolling machine has to match too: a 1 1/4 machine won't take king size papers.
Buying pre-rolled cones instead? They use the same names but are usually sold by finished cone length, such as 98mm for a 1 1/4 cone. The pre-rolled cones guide and pre-rolled cone sizes cover cone lengths and roughly how much each holds.
Single wide papers
Single wides are the shortest and narrowest of the four main sizes. They roll a small, slim roll.
Tip: 6mm. At 36 to 38mm wide, there isn't much paper to spare, so a slim tip leaves enough overlap for the gum to seal flat. The Slim Jim (6mm x 28mm) is made for this.
1 1/4 papers
At about 78 x 44mm, 1 1/4 is a forgiving size to learn on. It's the one our how to roll a joint guide uses.
Tip: 7mm for a slim roll, or 8mm for a fuller roll with a sturdier base. The Midway (7mm x 28mm) is the easy default. Step up to the Big Boy (8mm x 37mm) if your rolls come out loose near the tip.
Machine: the 1 and 1/4 Rolling Machine.
King size slim papers
Same length as king size, same width as 1 1/4. You get a long roll with a slim profile.
Tip: 7mm or 8mm. The Big Boy is the longer tip (37mm vs 28mm), which some people prefer on a long paper.
King size papers
The longest and widest of the four main sizes, for big rolls and sharing.
Tip: 8mm for a standard roll, or 12mm for a big one. A wide tip needs a wide paper to wrap it with a clean overlap, which is why the 12mm pairs with king size. More in 12mm filter tips.
Machine: the King size Rolling Machine.
How do paper size and tip size work together?
Paper width is how much wrap you have. Tip diameter is how much of that wrap the tip uses.
- Tip too wide for the paper: the gum line won't reach, or the seam over the tip wrinkles and splits.
- Tip too narrow for the paper: the roll pinches right above the tip and the tip can slide around.
The fix is almost always switching sizes, not rolling tighter or looser. The filter tip size guide goes deeper.
What if the paper is too big for what you're rolling?
Extra paper wraps around the roll in extra layers, and those can burn differently from the filling. That's one cause of a joint that runs or canoes; see why does my joint canoe. Either size down or tear off the extra before you seal. Backrolling is another way to end up with about one layer of paper.
Frequently asked questions
What are the dimensions of 1 1/4 rolling papers?
About 77 to 78mm long and 44mm wide. Brands vary by a millimeter or two.
What's the difference between 1 1/4 and king size papers?
King size papers are about 30mm longer (roughly 108 to 110mm vs 77 to 78mm). King size slim keeps the 1 1/4 width of about 44mm, and regular king size is wider too, about 53 to 60mm.
What does king size slim mean?
King size length (about 108 to 110mm) with a narrower width, usually around 44mm. You get a long roll that isn't fat.
What tip size goes with single wide papers?
A 6mm tip. Single wide papers are only about 36 to 38mm wide, so a slim tip leaves enough paper to overlap and seal.
Do rolling machines come in different sizes?
Yes. A machine is sized to a paper length, so a 1 1/4 machine takes 1 1/4 papers and a king size machine takes king size papers.
Shop Das tips and rolling machines. Products are for adults 21+.