Das Filter Blog

Pre-Rolled Cone Sizes: 1 1/4, 98 Special, King and Small

By Das Filter Team3 min read

Several rolled joints of different lengths on a wooden table next to an ashtray

Quick answer: Common pre-rolled cone sizes are small (~84mm, roughly 0.3–0.5g), 1 1/4 / 98 Special (~98mm, roughly 0.5–0.75g), and king size (~109mm, about 1g). Exact fill depends on the brand, your grind and how tightly you pack.

This is the size-and-capacity chart. For which cone to buy overall, see the pre-rolled cones guide. For fill steps, see how to fill a cone.

Pre-rolled cone sizes chart

Name on the packApprox. finished lengthRough fillBest for
Small / mini (often 84mm)~84mm~0.3–0.5gA quick solo smoke
1 1/4 / 98 Special (often 98mm)~98mm~0.5–0.75gEveryday solo sessions
King size~109mm~1gSharing, or a longer solo

Lengths and names overlap between brands. In many cone lines, "98 Special" means the ~98mm cone, the same everyday size people call 1 1/4 (see the rolling glossary). Go by the millimeters on the pack when labels conflict. Paper size names for hand-rolling are covered in rolling paper sizes; cones are usually sold by finished cone length instead.

How much does each cone hold?

There's no single factory standard. Packing and grind move the number:

  • Small (~84mm): about 0.3–0.5g.
  • 1 1/4 / 98 Special (~98mm): about 0.5–0.75g.
  • King (~109mm): about 1g.

A fine, dense pack holds more weight in the same cone than a fluffy pack. If you're portioning an eighth across several cones, how many joints in an eighth walks through the math.

1 gram pre-roll size

When people search "1 gram pre roll size," they usually want a king-size paper cone or a cone labeled 1g. King paper cones are the usual paper answer. Banana leaf cones sold as 1g are another option; leaf vs paper is in banana leaf cones vs paper cones.

Our Nanner Barrels are 1g banana leaf cones in 3-, 6- and 20-packs.

Which tip fits which cone?

Most paper cones ship with a thin paper tip already in the narrow end. You don't have to swap it. If you're building a cone around your own tip, or you want a wider draw:

ConeTip that matches the mouth end
Small / slim6mm
1 1/4 / 98 Special7mm or 8mm
King / fat mouth end8mm or 12mm

A 12mm tip (12mm x 30mm) is the size we pair with fat / king mouth ends; a slim tip leaves a gap in a wide opening. Full pairing chart: filter tip size guide. Still deciding papers vs cones? See rolling papers vs cones. Hand-rolling from a blank paper starts at how to roll a joint.

Frequently asked questions

What are the common pre-rolled cone sizes?

The everyday names are small (often ~84mm), 1 1/4 or 98 Special (often ~98mm), and king size (often ~109mm). Brands don't always use the same label for the same length, so check the millimeters on the pack.

How much does a 1 1/4 cone hold?

Roughly 0.5 to 0.75 grams, depending on the brand, your grind and how firmly you pack.

How much does a king size cone hold?

About 1 gram is a common fill. Some king cones take a little more or less; packing density changes it.

What size is a 1 gram pre-roll cone?

King size paper cones are usually aimed at about a gram. Banana leaf cones labeled 1g, like Nanner Barrels, are sized for that fill too.

What tip size fits a king cone?

Most paper cones already have a thin tip. If you want a wider draw at a fat mouth end, a 12mm tip matches king-size cone openings better than a slim tip.


Products are for adults 21+.

Shop Das Filter

Products in this post

Activated carbon filter tips, papers and rolling gear, made and shipped from Austin, TX.

See all products Buying for a shop? Wholesale